Solar Panel Mounting Brackets Kit System Adjustable 30º~45º Aluminum Alloy Tilt Ground Mounted Bracket Rust Free Sturdy for 1-4pcs Solar Panels

Price: $150.00
(as of Jun 25, 2024 07:09:47 UTC – Details)

Product Description

CMYYANGLIN

We are committed to providing solar mounting customized design solution. Our products are designed well for easy installation.

Solar Panel Mounting Brackets Kit System Aluminum Alloy Tilt Ground Mounted Bracket

Adjustable 30º~45º Rust Free Sturdy for 1-4pcs Solar Panels

Compared to a roof mount, a ground-mounted system may produce more energy per watt of solar installed. The cooler the solar systems are, the more efficient they are. With less heat present, there will be less friction when the energy transfers from the solar panels to your home or business.

1)Rail*6pcs: 105cm/41.3 inch long each, supporting four solar panels (within 200w) or 3pcs (200w-300w) or 2pcs (360w-550w each) fixed vertically. 2) pre-assembled triangle bracket*3pcs: flexibly secure rails to the ground at the desired height and ideal angle 30º~45º to give more ventilation and get more power generation. 3)Adjustable end clamps*4pcs: secure a solar panel 30-45mm/1.18 inch-1.77 inch high. 4)Adjustable mid clamps*8 secure two solar panels 30-45mm/1.18 inch-1.77 inch high in the middle 5) Rust free Material- Aluminum alloy is light, sturdy and rust free. It’s easy for you to carry and its lifespan is as long as 10 years. 6)L spanner*1pc: tool to tighten or loosen end clamps and mid clamps. 7) rail connector*6pcs: to extend rail length, additional quantity for you to expand the kit

Ground Mounting Brackets for Solar Panels Adjustable 30º~45º

Ground-mount solar panels get set up on the ground and use a standard installation. The additional materials needed here are cement foundations. If you can put solar near your home with this ground-mounted system, then you can set up a perfectly optimized system that generates the maximum possible energy per panel.

Adjustable 30º~45º ideal angle for solar power

A common rule of thumb is that solar panels are most productive when they’re installed at an angle to match the local latitude.

Adjustable End Clamp

Hold the edge of solar panel tight flexiblyfit 30 mm – 45 mm high solar panels

Adjustable Mid Clamp

Clamp the panels on rails flexiblyFit solar panels 30-45 mm thick

Rail Connector

to extend rail length, give additional quantity for you to expand the kit

Ground Clamp

consist of earth clamps, screws, earth pieces, spacers and terminal blocks. They come pre-assembled

This solar panel mounting bracket can vertically mount solar panels as below:

100w-200w 4pcs

200w-300w 3pcs

360w-550w 2pcs

Ground Mount- If you can put solar near your home with this ground-mounted system, you can set up a perfectly optimized system that generates the maximum possible energy per panel. When your roof is not in suitable condition, please use this solar panel mounting kit which is more convenient for you to choose an ideal installation place in your yard at any open space.
adjustable 30º~45º -ideal angle for solar powers: With the perfect azimuth and tilt, you’ll likely squeeze out 1-2% more energy over the course of a year than you would if you set up your ground-mount system facing due south, tilted to match the local latitude.
Rust free Material- Aluminum alloy is light, sturdy and rust free. It’s easy for you to carry and its lifespan is as long as 10 years.
Rail End Cap- There are also rail end caps in this kit for better protection of the solar panel mounting kit.
Function-This solar panel mounting system can assemble 1-4 pcs of solar panels. Rails can be connected into 3150mm long. So, it can vertically install1-4pcs of solar panels. This kit of solar panel brackets is very helpful in increasing solar power output, capable of withstanding weather conditions, such as high winds or heavy snow loads.We offer risk-free purchase service and satisfying customer service.